dmesg - LLVM Clang 3.4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.17.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201408210205 SMP Thu Aug 21 06:06:41 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000a36e9fff] usable
BIOS-e820: [mem 0x00000000a36ea000-0x00000000a38ebfff] reserved
BIOS-e820: [mem 0x00000000a38ec000-0x00000000b45cbfff] usable
BIOS-e820: [mem 0x00000000b45cc000-0x00000000b6eeefff] reserved
BIOS-e820: [mem 0x00000000b6eef000-0x00000000b6f9efff] ACPI NVS
BIOS-e820: [mem 0x00000000b6f9f000-0x00000000b6ffefff] ACPI data
BIOS-e820: [mem 0x00000000b6fff000-0x00000000b6ffffff] usable
BIOS-e820: [mem 0x00000000b7000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: CompuLab Intense-PC/Intense-PC, BIOS CR_2.2.0.262 X64 06/25/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0B8000000 mask FF8000000 uncachable
4 base 0B7000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 23F000000 mask FFF000000 uncachable
8 base 23E800000 mask FFF800000 uncachable
9 base 23E600000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xb7000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fc6000, 0x01fc6fff] PGTABLE
BRK [0x01fc7000, 0x01fc7fff] PGTABLE
BRK [0x01fc8000, 0x01fc8fff] PGTABLE
init_memory_mapping: [mem 0x23e400000-0x23e5fffff]
[mem 0x23e400000-0x23e5fffff] page 2M
BRK [0x01fc9000, 0x01fc9fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23e3fffff]
[mem 0x23c000000-0x23e3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01fca000, 0x01fcafff] PGTABLE
BRK [0x01fcb000, 0x01fcbfff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xa36e9fff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0xa35fffff] page 2M
[mem 0xa3600000-0xa36e9fff] page 4k
init_memory_mapping: [mem 0xa38ec000-0xb45cbfff]
[mem 0xa38ec000-0xa39fffff] page 4k
[mem 0xa3a00000-0xb43fffff] page 2M
[mem 0xb4400000-0xb45cbfff] page 4k
init_memory_mapping: [mem 0xb6fff000-0xb6ffffff]
[mem 0xb6fff000-0xb6ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
cma: Reserved 64 MiB at 23a400000
RAMDISK: [mem 0x35c18000-0x36e03fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 PTL )
ACPI: XSDT 0x00000000B6FFE170 00008C (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: FACP 0x00000000B6FEC000 0000F4 (v03 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: DSDT 0x00000000B6FEF000 00CB96 (v02 PTL IVB-CPT 00000000 INTL 20061109)
ACPI: FACS 0x00000000B6F7D000 000040
ACPI: SSDT 0x00000000B6FFC000 001068 (v01 PTL PtidDevc 00001000 INTL 20061109)
ACPI: HPET 0x00000000B6FEB000 000038 (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: APIC 0x00000000B6FEA000 000098 (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: MCFG 0x00000000B6FE9000 00003C (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: FPDT 0x00000000B6FE8000 000054 (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: ASF! 0x00000000B6FEE000 0000A5 (v32 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: SSDT 0x00000000B6FE7000 000968 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B6FE6000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x00000000B6FE5000 00003E (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0x00000000B6FE4000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 0x00000000B6FE3000 000055 (v03 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0x00000000B6FE2000 000256 (v01 PTL OEMTABLE 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
Initmem setup node 0 [mem 0x00000000-0x23e5fffff]
NODE_DATA [mem 0x23e5f2000-0x23e5f6fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880231e00000-ffff880239bfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xa36e9fff]
node 0: [mem 0xa38ec000-0xb45cbfff]
node 0: [mem 0xb6fff000-0xb6ffffff]
node 0: [mem 0x100000000-0x23e5fffff]
On node 0 totalpages: 2041702
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11464 pages used for memmap
DMA32 zone: 733642 pages, LIFO batch:31
Normal zone: 20376 pages used for memmap
Normal zone: 1304064 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xb7a00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xa36ea000-0xa38ebfff]
PM: Registered nosave memory: [mem 0xb45cc000-0xb6eeefff]
PM: Registered nosave memory: [mem 0xb6eef000-0xb6f9efff]
PM: Registered nosave memory: [mem 0xb6f9f000-0xb6ffefff]
PM: Registered nosave memory: [mem 0xb7000000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023a200000 s86784 r8192 d23808 u262144
pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2009777
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7870348K/8166808K available (7841K kernel code, 1141K rwdata, 3768K rodata, 1372K init, 1308K bss, 296460K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33030144 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.840 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.68 BogoMIPS (lpj=8779360)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140724
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81e76000 - ffffffff81e7d000)
ftrace: allocating 32200 entries in 126 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3517UE CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3[ 0.130076] CPU3: Thermal monitoring handled by SMI
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17558.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb6eef000-0xb6f9efff] (720896 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:50:00, date: 08/31/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022E948000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022E8E2400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022E8AF200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0720000-0xe072ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0735000-0xe073500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:1e3c] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io 0x40d0-0x40d7]
pci 0000:00:16.2: reg 0x14: [io 0x40e4-0x40e7]
pci 0000:00:16.2: reg 0x18: [io 0x40c8-0x40cf]
pci 0000:00:16.2: reg 0x1c: [io 0x40e0-0x40e3]
pci 0000:00:16.2: reg 0x20: [io 0x40a0-0x40af]
pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x40c0-0x40c7]
pci 0000:00:16.3: reg 0x14: [mem 0xe073c000-0xe073cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe0700000-0xe071ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe073b000-0xe073bfff]
pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xe073a000-0xe073a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0730000-0xe0733fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe0739000-0xe07393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x40b8-0x40bf]
pci 0000:00:1f.2: reg 0x14: [io 0x40dc-0x40df]
pci 0000:00:1f.2: reg 0x18: [io 0x40b0-0x40b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x40d8-0x40db]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe0738000-0xe07387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0734000-0xe07340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xe0737000-0xe0737fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 0x18: [mem 0xe0600000-0xe0603fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
pci 0000:03:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xe0510000-0xe0511fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:04:00.0: reg 0x18: [mem 0xe0404000-0xe0404fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xe0400000-0xe0403fff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xa36ea000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xb45cc000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7000000-0xb7ffffff]
e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x06a4] has been reserved
system 00:00: [io 0x06a0] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x1003] has been reserved
system 00:01: [io 0x1004-0x1013] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.4: BAR 14: assigned [mem 0xbfa00000-0xbfafffff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:04:00.0: BAR 6: assigned [mem 0xbfa00000-0xbfa1ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xbfafffff]
pci 0000:00:1c.4: bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
pci_bus 0000:03: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xbfa00000-0xbfafffff]
pci_bus 0000:04: resource 2 [mem 0xe0400000-0xe04fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18352K (ffff880035c18000 - ffff880036e04000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb05cc000-0xb45cc000] (64MB) mapped at [ffff8800b05cc000-ffff8800b45cbfff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1409496600.996:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 15535
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (37 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (37 C)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0x40c0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
scsi host0: ata_generic
scsi host1: ata_generic
ata1: PATA max UDMA/100 cmd 0x40d0 ctl 0x40e4 bmdma 0x40a0 irq 18
ata2: PATA max UDMA/100 cmd 0x40c8 ctl 0x40e0 bmdma 0x40a8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe073a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.17.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0739000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.17.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 24 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.17.0-999-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.17.0-999-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:03:00.0: irq 25 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 26 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 27 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 28 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 29 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.17.0-999-generic xhci_hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.17.0-999-generic xhci_hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 3a0fe1d17131f86603b4aa2c11656e6cbf004332'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 10:614:840
rtc_cmos 00:02: setting system clock to 2014-08-31 14:50:01 UTC (1409496601)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-1: new high-speed USB device number 2 using ehci-pci
Freeing unused kernel memory: 1372K (ffffffff81d1f000 - ffffffff81e76000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
Freeing unused kernel memory: 328K (ffff880001bae000 - ffff880001c00000)
systemd-udevd[132]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 30 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c6c000, 00:01:c0:0d:97:36, XID 081000c0 IRQ 30
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:01:c0:0d:97:34
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
tsc: Refined TSC clocksource calibration: 2195.015 MHz
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m2048@0xe0738000 port 0xe0738100 irq 32
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xe0738000 port 0xe0738200 irq 32
ata6: SATA max UDMA/133 abar m2048@0xe0738000 port 0xe0738280 irq 32
ata7: DUMMY
ata8: DUMMY
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 5-1: new full-speed USB device number 2 using xhci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HCC547550A9E380, JE3OA60C, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HCC54755 A60C PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 5-1: New USB device found, idVendor=1532, idProduct=0012
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Razer Salmosa
usb 5-1: Manufacturer: Razer
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:1c.3/0000:03:00.0/usb5/5-1/5-1:1.0/0003:1532:0012.0001/input/input6
hid-generic 0003:1532:0012.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:03:00.0-1/input0
usb 3-1: new low-speed USB device number 2 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 3-1: New USB device found, idVendor=04f2, idProduct=0833
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: CHICONY
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04F2:0833.0002/input/input7
hid-generic 0003:04F2:0833.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-1/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:04F2:0833.0003/input/input8
hid-generic 0003:04F2:0833.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-1/input1
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
ata6: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3331
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
floppy0: no floppy controllers found
work still pending
floppy0: no floppy controllers found
random: nonblocking pool is initialized
init: ureadahead main process (205) terminated with status 5
Adding 8164348k swap on /dev/sda5. Priority:-1 extents:1 across:8164348k FS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[337]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
audit: type=1400 audit(1409496617.877:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=440 comm="apparmor_parser"
audit: type=1400 audit(1409496617.877:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
audit: type=1400 audit(1409496617.877:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 33 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
init: cups main process (464) killed by HUP signal
init: cups main process ended, respawning
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (c0000000 7f0000) vs hw (c0000000 20000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 34 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
usbcore: registered new interface driver btusb
audit: type=1400 audit(1409496619.273:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=505 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=506 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser"
audit: type=1400 audit(1409496619.273:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=504 comm="apparmor_parser"
fbcon: inteldrmfb (fb0) is primary device
[drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:41: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sound hdaudioC0D0: ALC888: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: dig-in=0x1f
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
intel_rapl: RAPL domain dram detection failed
floppy0: no floppy controllers found
init: failsafe main process (544) killed by TERM signal
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
floppy0: no floppy controllers found
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1409496626.373:23): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
audit: type=1400 audit(1409496626.373:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
audit: type=1400 audit(1409496626.373:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
audit: type=1400 audit(1409496626.373:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
audit: type=1400 audit(1409496626.373:27): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
audit: type=1400 audit(1409496626.373:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
audit: type=1400 audit(1409496626.421:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1409496626.425:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1409496626.425:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1409496626.425:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=891 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=8)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 123 callbacks suppressed
audit: type=1400 audit(1409496644.669:74): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1925 comm="apparmor_parser"
audit: type=1400 audit(1409496644.669:75): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1925 comm="apparmor_parser"
audit: type=1400 audit(1409496644.669:76): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1925 comm="apparmor_parser"
systemd-hostnamed[2230]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: deauthenticated from 60:a4:4c:69:bf:d0 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=8)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
systemd-hostnamed[4615]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[12735]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: Connection to AP 60:a4:4c:69:bf:d0 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=8)
wlan0: associated
wlan0: Connection to AP 60:a4:4c:69:bf:d0 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=8)
wlan0: associated
wlan0: deauthenticated from 60:a4:4c:69:bf:d0 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=8)
wlan0: associated
wlan0: deauthenticated from 60:a4:4c:69:bf:d0 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=7)
wlan0: associated
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
conftest[32006]: segfault at 0 ip 00007fd09cc035a4 sp 00007fff6ad06268 error 4 in libc-2.19.so[7fd09cac2000+1bc000]
conftest[32031]: segfault at 0 ip 00007f5e0c27a126 sp 00007fffe082be18 error 4 in libc-2.19.so[7f5e0c139000+1bc000]